Adding Another blinds device setup for rest of my house

#1

So can anyone give me instructions to adding another device, I already flash new servo motor now what?

#2

Cant flash my motor with arduino what does this message mean?

Arduino: 1.8.5 (Windows 7), Board: “Generic ESP8266 Module, 80 MHz, ck, 26 MHz, 40MHz, QIO, 512K (no SPIFFS), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200”

Archiving built core (caching) in: C:\Users\Gomez\AppData\Local\Temp\arduino_cache_668944\core\core_esp8266_esp8266_generic_CpuFrequency_80,ResetMethod_ck,CrystalFreq_26,FlashFreq_40,FlashMode_qio,FlashSize_512K0,led_2,LwIPVariant_v2mss536,Debug_Disabled,DebugLevel_None____,FlashErase_none,UploadSpeed_115200_d3f9fba5e18303591c76d3ef968c7e7e.a
Sketch uses 296984 bytes (59%) of program storage space. Maximum is 499696 bytes.
Global variables use 34592 bytes (42%) of dynamic memory, leaving 47328 bytes for local variables. Maximum is 81920 bytes.
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
error: espcomm_upload_mem failed

This report would have more information with
“Show verbose output during compilation”
option enabled in File -> Preferences.

#3

The esp can be a little flakey sometimes when uploading, unplug your Arduino from USB and replug into a different port and try again.

In terms of adding another device, you just need to change a few things like “Host Name of Device”, MQTT Topic, Unique device ID. You can just increment the numbers on these.

#4

Thanks for reply you’re absolutely right i changed those 3numbers and is working now

#5

image
image.png1366x768 27.1 KB

This is how im writing commands am i doin something wrong only 1 blind works. both work on open hab and mqtt but when i give command on putty to open at set time and close at set time only one opens. youll notice that i changed numbers to zero so till close the opposite way to keep any light from coming in