I have been attempting to update my Home Automation server to v2 per the video instructions. I have put in the server’s ip address with the http in front and the /firmware in the back; http://piserver/firmware
I keep getting an error that says can’t connect.
Any ideas on what might be the problem?
my pi server is connected via lan
Attempting to update Home automation server to v2
williambs50
#1
Fresh_City
#2
What exactly are you trying to update? Matts V2 firmware is for the ESP8266 blind controller, not your openhab server. You need to use your blind controllers device name or IP address, not your pi’s IP address.
williambs50
#3
I answered you in the other thread, I am trying to update the home automation server.
williambs50
#4
I got the flash of the firmware to work for one of my four blinds to work. After flashing the blinds will not respond to commands from Matt, or from openHAB, or from Alexa.
Any ideas to what happened to break the connection?