V .7.95 now available for download.
You will need to download manually and upgrade as the auto upgrade feature links to the old support server which no longer exists. Once you do this upgrade the OTA and version check and auto and manual download will work from the GUI again.
download firmware from:
https://mountaineagle-technologies.com.au/tasmota/mk-blindcontrol.bin
this upgrade should not break your existing firmware if it is greater then v7.
if less then V7 i.e. v6 and below you will need to reconfigure through the AP wifi setup again.
v7.95
Fixed several bugs. were minor but needed cleaning up.
Note:
Check that retained = false is set in ymal if using HA.
and there is no retained messages in the MQTT database for the device…ie. cmnd/“topic”/POWER or cmnd/“topic”/TILT
replace topic with device topic eg. lounge_blind